{"product_id":"raspberry-pi-csi-interfeys-kamerasi-5-milyon-piksel-15-sm-cevik-kabel-3-cu-nəsil-b-2-ci-nəsli-dəstəkləyir","title":"Raspberry Pi CSI interfeys kamerası 5 milyon piksel 15 sm çevik kabel 3-cü nəsil b\/2-ci nəsli dəstəkləyir","description":"\u003ch2 style=\"text-align:center; margin: 0 0 16px;\"\u003eRaspberry Pi CSI interfeys kamerası 5 milyon piksel 15 sm çevik kabel 3-cü nəsil b\/2-ci nəsli dəstəkləyir\u003c\/h2\u003e\n\n\u003cstyle\u003e\n  .product-desc-wide { max-width:100%; margin:0 auto; text-align:center; }\n  .product-desc-wide img { display:block; margin:16px auto; height:auto !important; }\n  .product-desc-wide img[style*=\"max-width: 750\"] {\n    max-width:1125px !important; width:100% !important;\n  }\n  @media (max-width:768px) {\n    .product-desc-wide img { max-width:100% !important; width:100% !important; }\n  }\n\u003c\/style\u003e\n\n\u003cdiv class=\"product-desc-wide\"\u003e\n  \u003cp style=\"text-align: center;\"\u003e没有技术支持，会用再买，谢谢。\n本产品支持开增值税发票\n \n\n连接方式：连接器的位置：90度垂直连接器，HDMI口旁边那个。连接时触点一侧朝向HDMI接口\n\n \n\n软件使用：\n1. RPi固件和raspi-config已经为了摄像头更新，请执行一次apt-get update; apt-get upgrade;\n2. raspi-config中选择camera，启动RPi固件中的摄像头驱动，然后重启\n3. 使用命令行程序raspivid和raspistill操作摄像头，捕捉视频片段或图像\n4. 捕捉到的视频片段需要用mplayer播放\n\n如何将摄像头的数据通过网络直播播发出去：\n通过nc命令（ncat - Concatenate and redirect sockets）将摄像头的输入数据，直接重定向到网络端口实现输出\n\n \n\n\n以下是详细说明\n\n参数:\n\n镜头：1\/4   5M\n\n光圈：2.9\n\n焦距：3.29\n\n视场角：72.4度\n\n硬件连接：\n\n1. 软排线，90度垂直连接器，HDMI口旁边那个。连接时触点一侧朝向HDMI接口。\n2. 使用前撕掉镜头上的保护膜\n3. 裸板，注意ESD伤害，谨防静电！\n\n软件使用：\n1. RPi固件和raspi-config已经为了摄像头更新，请执行一次apt-get update; apt-get upgrade;\n2. raspi-config中选择camera，启动RPi固件中的摄像头驱动，然后重启\n3. 使用命令行程序raspivid和raspistill操作摄像头，捕捉视频片段或图像\n4. 捕捉到的视频片段需要用mplayer播放\n\n\n如何将摄像头的数据通过网络直播播发出去：\n通过nc命令（ncat - Concatenate and redirect sockets）将摄像头的输入数据，直接重定向到网络端口实现输出.\n\nHow to enable camera support in Raspbian\n\nBoot up the Pi and log in. The default username is pi, and the default password is raspberry. (Note: if you have changed these from the default then you will need to supply your own user\/password details).\n\nRun the following commands in a terminal to upgrade the Raspberry Pi firmware to the latest version:\n\nsudo apt-get update\u003c\/p\u003e\n\u003cp\u003e\u003cimg align=\"absmiddle\" src=\"https:\/\/img.alicdn.com\/imgextra\/i3\/795477101\/O1CN01xIIS4522KJECTn9Ot_!!795477101.png\" style=\"max-width: 750.0px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eClick to enlarge\n\nsudo apt-get upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cimg align=\"absmiddle\" src=\"https:\/\/img.alicdn.com\/imgextra\/i2\/795477101\/O1CN012ZpQab22KJEFCRkEk_!!795477101.png\" style=\"max-width: 750.0px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eClick to enlarge\n\nAccess the configuration settings for the Pi by running the following command:\n\nsudo raspi-config\n\nNavigate to “camera” and select “enable”.\u003c\/p\u003e\n\u003cp\u003e\u003cimg align=\"absmiddle\" src=\"https:\/\/img.alicdn.com\/imgextra\/i2\/795477101\/O1CN01qWo8WQ22KJECwvjtX_!!795477101.png\" style=\"max-width: 750.0px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eClick to enlarge\n\n\u003c\/p\u003e\n\u003cp\u003e\u003cimg align=\"absmiddle\" src=\"https:\/\/img.alicdn.com\/imgextra\/i1\/795477101\/O1CN01SFXbXj22KJEBNEKcg_!!795477101.png\" style=\"max-width: 750.0px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eClick to enlarge\n\nSelect “Finish” and reboot.\u003c\/p\u003e\n\u003cp\u003e\u003cimg align=\"absmiddle\" src=\"https:\/\/img.alicdn.com\/imgextra\/i4\/795477101\/O1CN012TI57T22KJECTv4TS_!!795477101.png\" style=\"max-width: 750.0px;\"\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003eClick to enlarge\n\nHow to use the Raspberry Pi camera software\n\nraspivid is a command line application that allows you to capture video with the camera module, while the applicationraspistill allows you to capture images.\n\n-o or –output specifies the output filename and -t or –timeout specifies the amount of time that the preview will be displayed in milliseconds. Note that this set to 5s by default and that raspistill will capture the final frame of the preview period.\n\n-d or –demo runs the demo mode that will cycle through the various image effects that are available.\n\nExample commands\n\nCapture an image in jpeg format:\n\nraspistill -o image.jpg\n\nCapture a 5s video in h264 format:\n\nraspivid -o video.h264\n\nCapture a 10s video:\n\nraspivid -o video.h264 -t 10000\n\nCapture a 10s video in demo mode:\n\nraspivid -o video.h264 -t 10000 -d\n\nTo see a list of possible options for running raspivid or raspistill, you can run:\n\nraspivid   less\n\nraspistill   less\n\nUse the arrow keys to scroll and type q to exit.\n\nExtended documentation is available.\n\nNote that we recommend that you change SSH password if you are using a camera, in order to prevent unwanted access.\n\nHow to stream video from the Raspberry Pi camera over a network\n\nTo view the feed on Linux\n\nInstall the dependencies by running the following in a terminal:\n\nsudo apt-get install mplayer netcat\n\nFind your IP address by running ifconfig. (Your IP address will be listed in the console output and will probably be of the form 192.168.1.XXX).\n\nRun the following command in a terminal to view the feed using MPlayer:\n\nnc -l -p 5001   mplayer -fps 31 -cache 1024 -\n\nTo view the feed on Windows\n\nInstall and run Linux instead.\n\nFind your IP address by running ipconfig. (Your IP address will be listed in the console output and will probably be of the form 192.168.1.XXX).\n\nDownload MPlayer.\n\nDownload Netcat.\n\nNote that your browser may complain that these files are malicious, as they are unsigned executables.\n\nPress the Windows key and the ‘r’ key simultaneously to bring up the “Run” dialog. Enter cmd.exe into the dialog and press enter\/return to open a DOS prompt.\n\nEnter the following command at the prompt to view the feed using MPlayer:\n\n[Path to nc.exe]\\nc.exe -L -p 5001   [Path to mplayer.exe]\\mplayer.exe -fps 31 -cache 1024 -\n\nTo view the feed on OS X\n\nDownload MPlayer.\n\nAlternatively, you can download mplayer using Brew, which we recommend.\n\nFind your IP address by running ifconfig. (Your IP address will be listed in the console output and will probably be of the form 192.168.1.XXX).\n\nRun the following command in Terminal to view the feed using MPlayer:\n\nnc -l -p 5001   mplayer -fps 31 -cache 1024 -\n\nTo view the feed on a Raspberry Pi:\n\nFind your IP address by running ifconfig. (Your IP address will be listed in the console output and will probably be of the form 192.168.1.XXX).\n\nRun the following commands in a terminal on the receiving Pi:\n\nmkfifo buffer\n\nnc -p 5001 -l \u0026gt; buffer   \/opt\/vc\/src\/hello_pi\/hello_video\/hello_video.bin buffer\n\nTo transmit the feed from the Pi with camera module attached\n\nAfter setting up the “receiving” machine as per the instructions above, run the following commands in a terminal on the “transmitting” Pi:\n\nraspivid -t 999999 -o –   nc [insert the IP address of the client] 5001\n\nYou can then use the commands listed in the “How to use the Raspberry Pi camera software” section above to change the capture time or to add a video effect.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Yuego","offers":[{"title":"Default","offer_id":47723432313085,"sku":"6246531896140","price":4.0,"currency_code":"AZN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/1984\/5629\/files\/O1CN0140x4ZA22KJEEGIUMg__795477101.jpg?v=1781662164","url":"https:\/\/yuego.co\/products\/raspberry-pi-csi-interfeys-kamerasi-5-milyon-piksel-15-sm-cevik-kabel-3-cu-n%c9%99sil-b-2-ci-n%c9%99sli-d%c9%99st%c9%99kl%c9%99yir","provider":"Yuego","version":"1.0","type":"link"}